logo
বাড়ি > পণ্য > ভলভো S60 যন্ত্রাংশ >
Womala Front Bumper Bracket OE 31323833 for Volvo S60 V60 11-

Womala Front Bumper Bracket OE 31323833 for Volvo S60 V60 11-

Volvo S60 front bumper bracket

OE 31323833 bumper bracket

Volvo V60 front bumper replacement

উৎপত্তি স্থল:

চীন

পরিচিতিমুলক নাম:

Womala

সাক্ষ্যদান:

.

মডেল নম্বার:

31323833

আমাদের সাথে যোগাযোগ
একটি উদ্ধৃতি অনুরোধ করুন
পণ্যের বিবরণ
পণ্যের নাম:
বাম্পার বন্ধনী
প্যাকিং:
নিরপেক্ষ বাক্স
ওয়ারেন্টি:
12 মাস
গাড়ী মডেল:
ভলভো এস 60 ভি 60 এর জন্য
বন্দর:
গুয়াংজু
ওই না।:
31323833
বিশেষভাবে তুলে ধরা:

Volvo S60 front bumper bracket

,

OE 31323833 bumper bracket

,

Volvo V60 front bumper replacement

পেমেন্ট ও শিপিংয়ের শর্তাবলী
ন্যূনতম চাহিদার পরিমাণ
10 পিসি
মূল্য
5$-10$
প্যাকেজিং বিবরণ
নিরপেক্ষ প্যাকিং
ডেলিভারি সময়
5-7 দিন
পরিশোধের শর্ত
এল/সি, ডি/এ, ডি/পি, টি/টি, ওয়েস্টার্ন ইউনিয়ন, মানিগ্রাম
যোগানের ক্ষমতা
1000pcs/মাস
সম্পর্কিত পণ্য
আমাদের সাথে যোগাযোগ
এখনই যোগাযোগ করুন
পণ্যের বর্ণনা

Auto Spare Parts Front Right Bumper Bracket OE 31323833 for Volvo S60 V60 11-


This OE-grade front bumper bracket is specifically engineered for Volvo S60 and V60 models. As a critical structural component of the front bumper system, it adheres to Volvo’s original manufacturing standards for material strength, dimensional precision, and mounting compatibility. Designed to bridge the front bumper and the vehicle’s front frame rails, it ensures the bumper remains securely fastened, maintains factory-aligned positioning, and integrates seamlessly with the S60/V60’s front-end body structure—preserving both functional stability and aesthetic consistency.


Core Components & Functions


Core Component


The bracket is constructed from high-strength materials, typically either zinc-plated steel (for superior rust resistance and load-bearing capacity) or reinforced engineering thermoplastic (for a balance of durability and lightweight performance). It features pre-drilled mounting holes that align perfectly with the S60/V60’s bumper and frame rail attachment points, along with reinforced edges to resist deformation caused by road vibrations, minor impacts, or temperature fluctuations.

Core Functions

  • Bumper Securement: Fixes the front bumper firmly to the vehicle’s frame rails, preventing the bumper from shifting, sagging, or detaching during daily driving (e.g., over rough roads, high-speed travel, or low-speed contact with curbs/debris).
  • Impact Energy Distribution: Absorbs and disperses energy from minor front-end impacts, reducing direct damage to the bumper itself and underlying components (such as fog lights, radiator support, or front grille).
  • Alignment Maintenance: Maintains the bumper’s factory-set gaps with adjacent front-end parts (headlights, grille, and fenders), ensuring even spacing that preserves the vehicle’s sleek, original appearance and avoids misalignment-related issues like wind noise.



 Compatible Vehicles


Applicable Models Applicable Years
S60 (11-18), S60 (11-) 2011–2013
V60 (-18), V60 2011–2013



Installation & Usage Notes

  1. Pre-Installation Confirmation: Verify the bracket’s side (left/right—OE 31323833 may be vehicle-specific for either side; refer to the Volvo S60/V60 service manual to confirm orientation) to avoid misinstallation. Ensure the bracket matches the vehicle’s model year (2011–2016) as structural nuances may differ across years.
  2. Installation Steps (per Volvo service guidelines):
    • Safely lift the vehicle using jack stands and remove the front wheel (on the side of the bracket) for easier access to the mounting area.
    • Detach the old bracket by removing OE bolts from the bumper and frame rail; clean the mounting surfaces with a wire brush or cloth to remove rust, dirt, or residual adhesive.
    • Align the new bracket’s holes with the bumper and frame rail, then fasten using OE-spec bolts. Torque bolts to 15–20 N·m (over-tightening may strip threads or crack the bracket).
  3. Post-Installation Check: Reinstall the front wheel, lower the vehicle, and inspect the bumper’s alignment—ensure even gaps between the bumper and adjacent parts. Test drive at low speed to confirm no rattling (indicative of loose mounting).
  4. Maintenance & Care: Inspect the bracket annually for rust (on steel variants), cracked edges, or loose bolts. Replace immediately if damaged—compromised brackets increase the risk of bumper misalignment and reduce protection in impacts. Avoid non-OE hardware, as it may not meet the bracket’s load-bearing requirements.

Womala Front Bumper Bracket OE 31323833 for Volvo S60 V60 11- 0



Frequently Asked Questions

Q: How to determine if the bumper bracket needs replacement?

A: Signs of a failing bumper bracket include visible damage or deformation, misaligned bumper panels, unusual noises from the front end, or if the bumper appears loose or sagging on one side.

Q: What should be paid attention to when replacing the bumper bracket?

A: For optimal results, we recommend professional installation. Key considerations include ensuring proper alignment of all mounting points, checking for additional damaged components, and verifying all fasteners are properly torqued to specification.



Why Choose Our Products
  • Extensive Industry Experience: 13 years specializing in Volvo auto parts with precise product matching and technical solutions.
  • Quality Assurance: 10-stage quality inspection process including durability testing, surface roughness analysis, and dimensional verification.
  • Manufacturing Excellence: 15,000㎡ production base with 10,000+ SKUs in inventory for fast order fulfillment.
  • Strategic Partnerships: Collaborations with 50+ factories including suppliers to international brands like Bosch and Hella.

Womala Front Bumper Bracket OE 31323833 for Volvo S60 V60 11- 1

Womala Front Bumper Bracket OE 31323833 for Volvo S60 V60 11- 2

আপনার জিজ্ঞাসা সরাসরি আমাদের কাছে পাঠান

গোপনীয়তা নীতি চীন ভালো মানের ভলভো অটো পার্টস সরবরাহকারী। কপিরাইট © 2021-2025 Guangzhou Womala International Trade Co., Ltd. সমস্ত অধিকার সংরক্ষিত।